16" Impulse Sealer Repair Kit

16" Sealer Repair Kit for 16" Impulse Hand Sealer

Stock #: SMH400-R

GTIN: 00631546014499

Each 16" Sealer Repair Kit for 16" Impulse Hand Sealer comes with 2 heating elements, 2 lower Teflon strips and 1 upper teflon strip. It is always a smart idea to have more than one replacement heating wire and more then one lower Teflon strip on hand so that production never misses a beat.

Please follow these instructions for replacing element wires and teflon covers and insulator strip.

1. Unplug unit.

2. Unscrew (2 philips head screws) and remove cutter bar.

3. Unscrew chrome side plate and remove teflon cover. This exposes element wire.

4. Unhook old wire from post. Remove insulator strip below wire. Replace adhesive strip cover all exposed metal.

5. Reattach new element wire, cover with new teflon, replace side plate and cutter bar.