$98.35 / Case of 1 RL
|Save up to 19.4% when you order in bulk|
|Quantity||Per Case||Total||You Save|
|10+ Cases||Get a free high quantity quote|
Clasi Bubble Wave Wrapper Roll by Ameson are used in the Mini Air Clasi air pillow machine. This film makes a 16" wide bubble cushion with a perforation line to tear off the desired length. A new roll has 1476 ft of LDPE/HDPE film. Simply load the Clasi Bubble Tube Wave Wrapper Roll film on the film holder, and insert the roll with the black line on the air pipe side to begin the operation. Press "SET" to change the Temperature, Length and Air Volume that you need. The recommended temperature (S.T.) is "170". Press "ENT" to save the data. Then pre-set the desired meter length (M) of film and press "ENT" to save the data. Set air volume that is recommended between 25-35 and press "ENT" to save the data. Then feed the film's air channel over the air pipe. Press "IN/OUT" and pull the film slightly at the same time. Press "START" to inflate the film. Press "+" or "-" to adjust air volume. Press "STOP" to stop inflating. Tear off the cushion bag at the perforation. Press "IN/OUT" to run out the rest of the film. Now you are ready to package your goods.