Each 12" Sealer Repair Kit for 12" Impulse Hand Sealer comes with 2 heating elements, 2 lower Teflon strips and 1 upper teflon strip. It is always a smart idea to have more than one replacement heating wire and more then one lower Teflon strip on hand so that production never misses a beat. This 8 inch sealer with built in trimmer comes with an extra service kit, but we are always here to supply you with another one, if need be.

Please follow these instructions for replacing element wires and teflon covers and insulator strip.

1. Unplug unit.

2. Unscrew (2 philips head screws) and remove cutter bar.

3. Unscrew chrome side plate and remove teflon cover. This exposes element wire.

4. Unhook old wire from post. Remove insulator strip below wire. Replace adhesive strip cover all exposed metal.

5. Reattach new element wire, cover with new teflon, replace side plate and cutter bar.