Wheels for Hand Trucks and Dollies

Need a replacement wheel or tire for your Hand Truck, Dollie, Platform Truck or wheel barrel? Just pick from our wide variety below. These are a special order item.

Aluminum Wheel With Moldon Rubber Tire

Long-wearing Mold-On Rubber Tires are used primarily on industrial equipment. cast aluminum hub, ball bearing and grease fitting.

Part #	Model	Diameter	Hub Type	Tread Width	Hub Length	Bore ID	Approx. Wt.	Bearing Type	Capacity lbs.
050567	A	6"	Solid	2"	2.375"	.625"	2.5 lbs	Ball	500
052776	AB	6"	Solid	2"	2.375"	.75"	2.5 lbs	Ball	500
053706	-	6"	Solid	2"	2.1875"	.625"	2.5 lbs	Roller	500
053707	-	6"	Solid	2"	2.1875"	.75"	2.5 lbs	Roller	500
052870	RB	8"	Solid	1.625"	2"	.75"	3 lbs	Ball	500
108545	R	8"	Solid	1.625"	2"	.625"	3 lbs	Ball	500
052868	H-1B	8"	Solid	2"	2.25"	.75"	3.75 lbs	Ball	550
053708	H-1R	8"	Solid	2"	2.1875"	.625"	3.75 lbs	Roller	600
108546	RK-10	10"	Solid	2"	2.25"	.625"	4.5 lbs	Ball	600
108561	R3	8"	Spoke	1.625"	1.625"	.625"	2.5 lbs	Ball	300

Poly Wheel With Balloon Cushion Tire

Reduced friction and a smooth quiet ride. Strong one-piece polyolefin hub. Puncture-resistant shock absorbing non-marking balloon cushion tires. Great on hard surfaces tile and carpet.

Part#	Model	Diameter	Hub Type	Tread Width	Hub Length	Bore ID	Approx. Wt.	Bearing Type	Capacity lbs.
050567	A	6"	Solid	2"	2.375"	.625"	2.5 lbs	Ball	500
052776	AB	6"	Solid	2"	2.375"	.75"	2.5 lbs	Ball	500
053706	-	6"	Solid	2"	2.1875"	.625"	2.5 lbs	Roller	500
053707	-	6"	Solid	2"	2.1875"	.75"	2.5 lbs	Roller	500
052870	RB	8"	Solid	1.625"	2"	.75"	3 lbs	Ball	500
108545	R	8"	Solid	1.625"	2"	.625"	3 lbs	Ball	500
052868	H-1B	8"	Solid	2"	2.25"	.75"	3.75 lbs	Ball	550
053708	H-1R	8"	Solid	2"	2.1875"	.625"	3.75 lbs	Roller	600
108546	RK-10	10"	Solid	2"	2.25"	.625"	4.5 lbs	Ball	600
108561	R3	8"	Spoke	1.625"	1.625"	.625"	2.5 lbs	Ball	300

Microcellular Polyurethane Wheel With Solid Rubber Tire

Carefree tire will not go flat. one of the most common tires for hand trucks, garden carts, pressure washers, generators, and more. It comes standard with a 2.25” offset hub. This tire is lightweight, non marking and most importantly... Flat Free

Part#	Model	Diameter	Hub Type	Tread Width	Hub Length	Bore ID	Approx. Wt.	Bearing Type	Capacity lbs.
053446	CF	10"	Steel	3"	2.25"	.625"	5 lbs	Ball	280
053490	CFB	10"	Steel	3"	2.25"	.75"	5 lbs	Ball	280

Cast Iron With Moldon Rubber Tire

Low profile moldon rubber with cast aluminum hub is sturdy and long lasting and rolls smoothly on ball bearings.

Part#	Model	Diameter	Tread Width	Hub Length	Bore ID	Approx. Wt.	Bearing Type	Capacity lbs.
053722	-	5"	2"	2.1875"	.75"	3.25 lbs	Roller	500
108838	-	6"	1.5"	2"	.75"	3.5 lbs	Ball	400
108839	-	6"	1.5"	2"	.625"	3.5 lbs	Ball	400
053723	-	6"	2"	2.1875"	.625"	4.25 lbs	Roller	500
053724	-	6"	2"	2.1875"	.75"	4.25 lbs	Roller	500
050579	H	8"	2"	2.1875"	.625"	6.25 lbs	Roller	600
150120	HB	8"	2"	2.1875"	.75"	6.25 lbs	Roller	600
150596	BT	10"	2.5"	2.75"	1"	13.75 lbs	Roller	800
053727	-	12"	2.5"	2.85"	1"	18.5 lbs	Roller	900

Solid Zinc / Steel Wheel With A Full Pneumatic Rubber Tire

For use on rough terrain indoor or outdoor. Inflatable tube-type or tubeless tire mounted on steel / zinc rims. Provides excellent flotation. Optimum combination of shock absorption and roll-ability. *Actual tread face wider than indicated tread width

Part#	Model	Diameter	Hub Type	Tread Width	Hub Length	Bore ID	Approx. Wt.	Bearing Type	Capacity lbs.
050602	P	10"	Zinc/Steel	3.5"	2.25"	.625"	4 lbs	Ball	350
108478	PB	10"	Zinc/Steel	3.5"	2.25"	.75"	4 lbs	Ball	350
108484	P-12	12"	Zinc/Steel	4"	3.25"	.75"	7 lbs	Ball	350
151507*	PWT	10"	Zinc/Steel	3.5"	2.25"	.625"	4 lbs	Ball	350
151505	PE	10"	Zinc/Steel	3.5"	2.25"	.625"	3 lbs	Ball	350

Phenolic Resin Wheels

A one-piece wheel of fiber reinforced phenolic resin molded under extreme heat. Provides easy rolling and good capacity at a modest cost. Easy rolling, high capacity, economical, chemical resistant and floor protective in intermittent operation.

Part#	Model	Diameter	Tread Width	Hub Length	Bore ID	Approx. Wt.	Bearing Type	Capacity lbs.
053902	-	5"	2"	2.1875"	.625"	1.75 lbs	Roller	1000
053769	-	5"	2"	2.1875"	.75"	1.75 lbs	Roller	1000
053903	-	6"	2"	2.1875"	.625"	2.5 lbs	Roller	1200
053770	-	6"	2"	2.1875"	.75"	2.5 lbs	Roller	1200

Polyolefin Wheel With Moldon Rubber Tire

Part#	Model	Diameter	Tread Width	Hub Length	Bore ID	Approx. Wt.	Bearing Type	Capacity lbs.
150692	R2	8"	1.625"	2.187"	.625"	1 lb	Plain	375

Solid Polyolefin Wheels

Injection-molded from a blend of polymers that provides water resistance and high impact strength at low cost. Easy rolling, high capacity, economical, chemical resistant and floor protective in intermittent operation.

Part#	Model	Diameter	Tread Width	Hub Length	Bore ID	Approx. Wt.	Bearing Type	Capacity lbs.
150103	CWP-1	2.5"	1.125"	1.25"	.5"	2.5 oz	Plain	200
150197	-	3"	1.25"	1.56"	.375"	3 oz	Plain	300
101355	-	4"	1.25"	1.56"	.5"	5 oz	Plain	350
108300	CT-3	5"	1.5"	1.62"	.5"	8 oz	Plain	400
150693	E-2	6"	1.5"	1.625"	.625"	13 oz	Plain	500
150204	-	8"	2"	2.25"	.75"	2 lbs	Plain	600
150691	BT-W	10"	2"	2.75"	1"	2.5 lbs	Plain	750

Aluminum Offset Hub With Solid Moldon Rubber Tire

Economical choice for paved indoor surfaces. Solid tire permanently vulcanized to cast aluminum wheel. Light-weight, lest corrosive than cast iron

Part#	Model	Diameter	Tread Width	Hub Length	Bore ID	Approx. Wt.	Bearing Type	Capacity lbs.
108561	R3	8"	1.625	1.625	.625	2.5 lbs	Ball	300

Poly or Zinc / Steel Wheel with Semi-Pneumatic Tire

For all-purpose terrain indoor or outdoor.

Part#	Model	Diameter	Hub Type	Tread Width	Hub Length	Bore ID	Approx. Wt.	Bearing Type	Capacity lbs.
150225	Q	8"	Poly	1.75"	2"	.625"	3 lbs	Plain	150
050578	R1	8"	Zinc/Steel	2.5"	2"	.625"	4.25 lbs	Ball	250
052859	R1B	8"	Zinc/Steel	2.5"	2"	.75"	4.25 lbs	Ball	250
150589	Z	10"	Zinc/Steel	2.75"	2.25"	.625"	6.25 lbs	Ball	350
052862	ZB	10"	Zinc/Steel	2.75"	2.25"	.75"	6.25 lbs	Ball	350

Poly Wheel with Semi Pneumatic Tire

Semi Pneumatic Tire with Plastic Hub. Best for general purpose use.

Part#	Model	Diameter	Hub Type	Tread Width	Hub Length	Bore ID	Approx. Wt.	Bearing Type	Capacity lbs.
150698	Z2	10"	Poly	2.75"	2.25"	.625"	5.75 lbs	Ball	550
150697	Z8	8"	Poly	2"	2.25"	.625"	3.5 lbs	Ball	300
150699	Z6	6"	Rubber	2"	2.25"	.625"	3 lbs	None	350
108479	SR	10"	Poly	2.5"	2.25"	.625"	9 lbs	Ball	250