R Series Inks

These Dye type Inks are recommended for use on porous surfaces. Use with our Rol-It-On (RIO) and Rol Flo Latex Rollers. Dries instantly on most surfaces to a permanent matte finish; oil, water and fade resistant. diagraph r-1 red ink

GS Series Inks

Diagraph GS-3 White

Pigmented type Inks recommended for use on porous or non-porous surfaces with the Rol-It-On type N roller and Oneshot stencil systems. All GS Inks are specifically formulated to meet government specifications TT-I-1795A and CID A-A-208 type IV.

S Series Inks

Pigmented type Inks recommended for use on non-porous surfaces with the Rol-It-On type N stencil roller. S type Inks are a pigmented dye to be used on HV and Rol-It-On (RIO) Type N Rollers.They are lightfast. Resistant to oil, water and some solvents after drying. Requires agitation.

PR Series Inks

Pigmented Inks are specially formulated for use on difficult-to-mark surfaces like plastic and rubber. Recommended for use with Rol-It-On type N roller.

Blockout Inks in Spray Can

Reuse your storage cartons by covering up unwanted marks with our blockout inks. Dries quickly and is oil- and water-resistant on porous and non-porous surfaces. New VOC-compliant formula contains no CFC and is available in tan and white.

Tan Aerosol Can Diagraph #0894010

White Aerosol Can Diagraph #1563157

Oneshot Brush Cartridge

 The Oneshot Brush Cartridge is identical to the roller system. The Oneshot Brush is made of 100% natural bristles set in epoxy for long lasting performance. The Ink Cartridge serves as a handle.

Oneshot Kit

The Oneshot Kit is the perfect way to start a Oneshot stencil system. The kit comes with everything you need to get started: a 3" roller assembly, roller cover and eight GS-1 type black Ink cartridges.

Flat Clamp duplicators feature Ink-in-the-handle convenience with our unique Siphon-Flo disposable Inking system. The enclosed Ink reservoir assures no-mess ink distribution. Extra strong clamps prevents the stencil from slipping or wrinking.

Oneshot Ink Cartridge

When attaching the Oneshot roller or bursh to the cartridge, a polyprolene membrane is pierced, allowing Ink to flow into the applicator. Inks are for porous and non-porous surfaces. Minimum order is eight cartridges - one liter of Ink.

These opaque aerosol Inks are great for color coding. They dry in just 30 to 60 seconds. All Ink formulations comply with CONEG legislation. They utilize a non-fluorocarbon propellant, which is environmentally safe.

Stencil Roller Conditioner

Extends stencil roller and pad life by preventing them from drying out. Adds Ink mileage by maintaining the proper Ink consistency. For use with all stencil rollers. Refillable stencilling brush is perfect for marking on rough, porous surfaces. 100% natural bristles are set in epoxy for long-lasting performance with solvent based Inks. Measures 7 1/2". Easy-to-use side button releases Ink. Use with Insta-Dry Inks.

Rol-It-On Stencil System

 The Rol-It-On Stencil System is the most economical system from Diagraph. This stencil system works well on porous surfaces and non-porous surfaces. Use the GS kit to meet government specifications when stenciling on porous surfaces or non-porous surfaces. For porous surfaces use a latex roller, Ink pad and R Series Inks. For non-porous surfaces use a type N neoprene roller Ink pad and S, GS or PR Inks. Consists of a 3" roller assembly, roller cover, regular Rol-It-On Ink pad and one quart of black Ink. Select Ink by matching Ink type to your application surface. Choose GS black Ink to mark on porous or non-porous surfaces.

Diagraph's Oneshot Roller twists onto a specially designed Ink cartridge - creating an easy-to-use stenciling tool. There's no messy refill, simply attach a new cartridge.

For use on either porous or non-porous surfaces. Assembly features a durable neoprene roller and valve action Ink release. Replacement rollersand roller covers also available.

Rocker Model Hand Duplicator

 The Rocker Model Hand Duplicator features a cloth-covered neoprene pad for clear marks on uneven surfaces. They also feature the convenience of Ink-in-the-handle or use a built-in reservoir that assures excellent Ink distribution throughout the pad.

Rocker Starter Kit

 The Rocker Starter Kit includes everything you need to get started: Rocker Duplicator, Stand, Brush, one pint of black P-1 Ink and 200 S Stencils.

Standard S Duplicator Stencils

Standard S Duplicator Stencils have a heavy backing sheet with extra-strength blue stencil tissue. Ballpoint pens and typewriter preparation work well with S stencils. Put your logo or other graphic image on any of these stencils mentioned here. Your company or product specific image can accompany your address mark. Update your current stencils, add variations for special applications or create completely new stencils. Simply send us your camera-ready artwork with your order. Artwork must fit inside print area.