Hot Melt Adhesive Products

3M Scotch-Weld Hot Melt Adhesive Products are 100% solid thermoplastic resins that become fluid when heated. They cool, harden and reach bond strength in seconds, which keeps your production lines flowing. Available in 120 Volt. 220 Volt available on request.

3762LM Q Hot Melt Adhesive Amber

Low Melt, 100% Solids Thermoplastic Adhesive. Improved Hot Tack When Dispensed at Low Melt Temperature. Can Bond Breadboard, Corrugated, and Displays.

3762Q Hot Melt Tan Adhesive

Hot Melt Clear Adhesive 3792-LM Q

100% solids, thermoplastic, Hot Melt Adhesive. Specifically designed for manually closing various styles of corrugated and chipboard POP displays. Made from componenets lsited under FDA Regulations for adhesives (21 CFR 175.105). Designed to be dispensed through 3M™ Polygun™ Applicators.

3792Q Hot Melt Clear Adhesive 

A clear, general purpose Hot Melt adhesive for product assembly. It features a long bonding range, good heat resistance, and good adhesion to many plastics and wood. Similar in performance to 3M™ Jet-melt™ Adhesive 3792. Made from components listed as indirect food additives under FDA Regulation for Adhesives (21 CFR 175.105). (EC Setting - #1)

Hot Melt Applicator T Tip Assembly 9726

Valve and adapter for all 3M™ Scotch-Weld™ Hot Melt PG Applicators.

Valve and adapter for all 3M™ Scotch-Weld™ Hot Melt PG Applicators.

Hot Melt Applicator Polygun EC

Multiple Temperature Adhesive Applicator that can be Used for a wide range of jobs. It Provides Multiple Temperatures with Choice of Pre-Set Temperature Module Kits that Insert Into the Handle.

Hot Melt Applicator TC Polygun

This applicator delivers up to 3.5 pounds of adhesive per hour. Key features include: 10 oz.; 150 watts; 120 VAC voltage; 385 degree F (196 degree C); and 5/8 in x 2 in cartridge size. 12 month warranty.